Part Number Hot Search : 
PSUH95 TLP504A MC10104P 00112 74AC11 0JCR9T URAM2M12 4744A
Product Description
Full Text Search
 

To Download BFR92ALT1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by BFR92ALT1/D
The RF Line
NPN Silicon High-Frequency Transistors
Designed primarily for use in high-gain, low-noise, small-signal UHF and microwave amplifiers constructed with thick and thin-film circuits using surface mount components. * T1 suffix indicates tape and reel packaging of 3,000 units per reel.
BFR92ALT1
RF TRANSISTORS NPN SILICON
MAXIMUM RATINGS
Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current -- Continuous Maximum Junction Temperature Power Dissipation, Tcase = 75C Derate linearly above Tcase = 75C @ Symbol VCEO VCBO VEBO IC TJmax PD(max) Value 15 20 2.0 25 150 0.273 3.64 Unit Vdc Vdc Vdc mAdc C W mW/C
THERMAL CHARACTERISTICS
Characteristic Storage Temperature Thermal Resistance Junction to Case Symbol Tstg RJC Max - 55 to +150 275 Unit C C/W CASE 318-08, STYLE 6 SOT-23 LOW PROFILE
DEVICE MARKING
BFR92ALT1 = P2
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage (1) (IC = 10 mA) Collector-Base Breakdown Voltage (IC = 100 A) Emitter-Base Breakdown Voltage (IC = 100 A) Collector Cutoff Current (VCB = 10 V) V(BR)CEO V(BR)CBO V(BR)EBO ICBO 15 20 2.0 -- -- -- -- 50 Vdc Vdc Vdc nA
ON CHARACTERISTICS
DC Current Gain (IC = 14 mA, VCE = 10 V) Collector-Emitter Saturation Voltage (1) (IC = 25 mA, IB = 5.0 mA) Base-Emitter Saturation Voltage (1) (IC = 25 mA, IB = 5.0 mA) NOTE: 1. Pulse Width 300 s, Duty Cycle 2.0%. hFE VCE(sat) VBE(sat) 40 -- -- -- 0.5 1.2 -- Vdc Vdc (continued)
REV 7
(c)MOTOROLA RF DEVICE DATA Motorola, Inc. 1995
BFR92ALT1 1
ELECTRICAL CHARACTERISTICS -- continued (TA = 25C unless otherwise noted)
Characteristic Symbol Typ Unit
SMALL-SIGNAL CHARACTERISTICS
Current-Gain -- Bandwidth Product (IC = 14 mA, VCE = 10 V, f = 500 MHz) Noise Figure (VCE = 1.5 V, IC = 3.0 mA, RS = 50 , f = 500 MHz) Capacitance-Collector to Base (VCB = 10 Vdc, f = 1.0 MHz) fT NF Ccb 4.5 3.0 0.7 GHz dB pF
PACKAGE DIMENSIONS
A L
3
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.
BS
1 2
V
G C D H K J
DIM A B C D G H J K L S V
INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236
MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60
STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR
CASE 318-08 ISSUE AE
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
BFR92ALT1 2
*BFR92ALT1/D*
BFR92ALT1/D MOTOROLA RF DEVICE DATA


▲Up To Search▲   

 
Price & Availability of BFR92ALT1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X